24V DC Motors

Product Details:
Back in stock! DC motor. 12 - 24v DC. Includes RF Interonics Bay Shore capacitor, 0.22 µF, 100v. 3" diameter body x 3.15" (+ shafts). 5/16" diameter "D" thru-shaft x 5/8" x 1". NSN: 6105-01-127-5200. NOTE: May be marked: B54735-G1.

Product Details:
Canon DC motor made for Canon printers. 18 - 24v DC. 1.61"D x 1.35"H body. 0.178" (2mm) shaft, 9mm long. Four threaded mounting holes on face. Made in Japan. NOTE: This lot has several equivalents, we may substitute a different model number but it will be the same motor as pictured.

Product Details:
Johnson DC motor. 24v DC, 60 ma (no load). 18mm (0.709") x 23.3mm (0.923"), 1.344" overall length. 2mm (0.775") x 9mm (0.368") round fluted shaft. 2 mounting holes on face, 15.5mm c-c. External access to brushes. 30,000+ pcs available!

Product Details:

Dunkermotoren governor controlled permanent magnet DC motor. No load current.

Motor Specifications:
• Rated for: 3 - 30v DC
• Governor control adjustable 2850-3200 rpm
• 20 ma. max. continuous torque 85 PCM
• Stall torque: 5 oz.-in.
• Speed without governor: 20,000 rpm at 350 ma.
• Body dimensions: 1.30" dia. x 3"L
• Shaft dimensions: 0.080" nominal (0.0785) x 0.375"L

Product Details:

TRW Globe Motors DC permanent magnet motor with tachogenerator. Mounts at front tapped holes on 1" center.

• Rated for: 24v DC
• Body Dimensions: 1-1/4" dia. x 2-1/8"L
• Shaft Dimensions: 0.098" dia. x 3/8"L. Pulley pressed on (fits 1/4" wide belt).

Product Details:
Yale dual DC motor. 18 - 24v DC. Made for 1970s tape decks. Belt pulley with set screw on 2mm shaft. 1-1/2"D x 1-3/8".

Product Details:

TRW Globe Motors DC motor.

• Rating: 24v DC, 165 ma., 5500 rpm, no load.
• Stall Torque: 15 oz.-in at 3 amps.
• Torque Constant: 5.5 oz.-in. / amp.
• Armature Resistance: 8.3 ohm
• Body Dimensions: 1-1/2" dia. x 2-5/8"L
• Shaft Dimensions: 0.1562" dia. x 5/16"L with flat. Face mount with four tapped holes

Product Details:
Oster DC motor. 26v DC, 14,000 rpm, 1/2 oz. in.  

• Body Dimensions: 1-1/8" diameter x 2-1/4"
• Shaft Dimensions: 0.164" diameter x 0.287" spline shaft

Product Details:

Motordyne, Inc. DC motor with dual front/rear shafts.
NSN: 5901-00-740-3260.

• Motor Specifications: 27.5v DC, 1.2 amp, 4500 rpm, 40° continuous duty, 1/50HP
• Front Shaft Dimensions: 0.246"DIA 90° squared one corner, 0.98"L
• Rear Shaft Dimensions: 0.185"DIA 90° squared one corner, 0.84"L
• Body Dimensions: 2-1/4"DIA x 4"L

Product Details:

Vernitron DC motor. Dual through shaft. Alt. P/N: 11MRA-AD3-TO.

• Motor Specifications: 28v DC
• Front Shaft Dimensions: 0.125"DIA x 0.375", 10 gear teeth
• Rear Shaft Dimensions: 0.125"DIA x 0.500", round shaft
• Body Dimensions: 1.068"DIA x 1.4"L

Product Details:
Northfield Electric Motor Co. DC motor. 27.5v, 2.5 amp, 0.044 HP, 7400 rpm. Int. duty. 1.5"D x 2.67"L. 0.370"D gear with 16 teeth. 0.85" x 1.056" mounting centers on 3 threaded holes. NSN: 6105-635-9503.

Product Details:
Western Gear DC motor. Reversible. 27v DC, 0.006 HP, 11,200 rpm. 1.25"D x 1.93"L body. 0.164" x 0.265" spline shaft. 0.626" mounting centers, (4) 4-40 threads. A-OK.

Product Details:
Emerson ART-13 motor aircraft direct current. 28v DC, 3.1 amp, 120 HP, 3900 rpm. Made for AN/ART-13. 2-1/2"D x 4-3/8"L frame. 1/4" D shaft, 0.58"L. 1-1/2" x 4" mounting centers. Circa 1950's. Boxed. Foil bags. Good condition.

Product Details:
Colman 24v DC motor. 6000 rpm. 1.257"D x 1.786"L + shaft. 0.125"D x 0.415"L shaft. 1" mounting centers on 6-32 head taps.

Product Details:
Colman 24v DC motor. 6350 rpm. 1.257"D x 2.22"L + shaft. 0.125"D x 0.410"L shaft. 1" mounting center on 6-32 head taps.

Product Details:
Tohoku Ricoh pancake motor. 24v DC, 55 watts output. 1-1/8"L shaft, 0.24" diameter. 4.12" x 4.12" case, 3" total height. 4 non-threaded mounting holes.

Product Details:
Vernitron DC motor. Dual through shaft. Alt. P/N: 11MRA-AD3-TO.Motor Specifications: 28v DCFront Shaft Dimensions: 0.125"DIA x 0.375", 10 gear teethRear Shaft Dimensions: 0.125"DIA x 0.500", round shaftBody Dimensions: 1.068"DIA x 1.4"L