Pushbutton Bank Switches

Product Details:

GE 5 position pushbutton switch bank. 17 amp, 120 / 240 vac. 4" long, 1-1/4" wide. 2-1/2" overall height or 1-1/2" depth below buttons. Huge olive drab buttons measure 1-1/16" x 5/8". UL & CSA listed. NSN: 5930-00-175-4606.

• Position 1: Terminals Y & G made
• Position 2: Terminals BR & B made + Y & G made
• Position 3: All contacts shorted
• Position 4: Terminals BR & R made
• Position 5: Terminals BR, R & Y made

Product Details:
Capitol 9 gang switch pushbutton bank. Each switch is DPDT. Mil-spec quality. Buttons and shafts rubber booted for weather proofing. 1-1/4"H x 7" bezel. 4" behind panel depth. Alt. P/N: 5D-7026-543. NSN: 5930-00-888-1125.

Product Details:
Harris television camera console switch deck. 8 buttons. $PDT contacts for each button. Lamp may be on or used contacts to switch. Lamps not included. New, unused. Harris P/N: 604-0565-00. Same frame as 1/2 of (SWP) MX4945 above. Made by Switchcraft.

Product Details:

Harris broadcast 7 position pushbutton bank. 6-3/8" overall length, 3-1/8" overall height. Switches are: Momentary - Microswitch P/N: 2D8, Maintained: Microswitch P/N: 2D32. All switches have gold contacts. 7 positions:

• REV: DPDT, momentary contact, yellow lamp
• CHANGE: DPDT, momentary contact, green lamp
• SHOW: DPDT, momentary contact, yellow lamp
• HOLD LEFT: DPDT, maintained contact, blue lamp
• HOLD RIGHT: DPDT, maintained contact, clear white lamp
• LAMP ON: DPDT maintained contact, red lamp
• SHOW: DPDT momentary contact, blue lamp

All have CM388 light bulbs. Harris P/N: 604-0617-000

Product Details:

Korry 10 button aircraft switch bank. Each button has 4 SPDT microswitches. Each button has two midget lamp sockets. 2-1/2" x 2-1/2" x 2-7/8" behind. Buttons are maintained or momentary as follows:

• GC1: momentary
• GC2: momentary
• GC3: momentary
• GC4: momentary
• SEA ALIGN / GROND ALIGN: maintained
• STOP CLOCK: maintained
• CLEAR: momentary
• TIME DET GAIN: maintained
• BIAS: maintained

Product Details:

Roto Tellite Eaton / Lockheed vintage aircraft instrument light assembly. 20 rocker illuminated switches. Switch rocks 2 ways - engaging a different lamp in each direction. Each position has two T 1 3/4 midget lamp sockets. Measures 8"L x 1-5/8" x 2"H.

• Fuse Duet Hot (Red)
• Cabin Pressure (Yellow)
• De-Icing (Yellow)
• Elec. Power (Yellow)
• Press. System (Yellow)
• Rack OVHT (Yellow)
• IFF (Yellow)
• Auto Pilot (Yellow)
• Flap Asym (Yellow)
• Door Open (Yellow)
• Rudder Power (Yellow)
• Auto Trim (Yellow)
• Hyd Pressure (Yellow)
• IA Hyd Pressure (Yellow)
• 2 Hyd Pres (Yellow)
• 1 Hyd Oil Hot (Yellow)
• 1A Hyd Oil Hot (Yellow)
• 2 Hyd Oil Hot (Yellow)
• NTS Inoperable (Red)
• Icing (Green)

Product Details:
Harris broadcast push-on knob. Ivory, plastic. Pushes on to flat shaft. 1/2" high above flange. 9/32" x 15/32" oval.

Product Details:
Kellogg 1940's communications push bank. Five buttons, each momentary with 2 normally open switches. High quality. No buttons. 2-1/2" x 4" x 5/8". NSN: 5930-296-5757.

Product Details:
Harris pushbutton switch. Two banks of 8. Gang linked. Each button 2 x SPST, normally open contacts. One must be used to switch on optional lamp. One button on at a time per bank. Yellow. Light socket under each button. Rows of switches can be separated. Banks are independent. 2" x 5-5/8" x 3-1/2" deep. New, old stock. Harris P/N: 604-0498-000. Made by Switchcraft.

Product Details:
Switchcraft pushbutton switch. Maintained DPST, normally open. Lamp provision. 5/8" x 7/8" button surface. Broadcast production spare. Harris P/N: 604-0500-000.

Product Details:
Switchcraft pushbutton switch. 8 gang. DPDT. Each switch is momentary and independent. 5-3/4" long, 3/4" high, 2" deep. 5-1/2" c-c mounting holes.

Product Details:
UID 12 pushbutton switch bank. 6-5/8"L bracket. 1" deep. 1/2" center - center, independent action. DPDT Push on, push off. 3 amp, 125 vac. No knobs.

Product Details:
5 button bank. All maintained and independent. Each button is SPDT and has 2 midget CM327 bulbs. One for each color half of switch. Made for Harris TV switch board. Harris P/N: 604-0538.

Product Details:
Schadow 8 gang pushbutton switch. Includes white button. Front mount. Bracket 3-3/4"L. Each DPDT button is 3/8" on center. Independent push on / off.

Product Details:
Schadow pushbutton bank switch. 3 gang, 2 are linked, 1 independent momentary. No buttons. 5/8" x 2-3/4" x 1" deep. 2.415" c-c mounting holes. Circa 1979. 5930-00-882-9222.

Product Details:
Switchcraft 10 button, pushbutton selector bank. Each button DPDT. All independent, all momentary because the governor plate spring was never installed. By adding the spring the switches become linked and interact so only one is maintained at a time.

Product Details:
Oak 11 position switch bank assembly. 4PDT each. Ganged and maintained. Push one button and release previous position. No knobs / buttons. 9-7/16" long. Made in 1975. NSN: 5930-00-246-5046.

Product Details:
General Electric 4 button bank. 3 position + "off". Maintained contact pushbutton (only one position at a time) bank with single high current contacts. (1 of 3 or none selected). 10 amps, 120 vac; 8 amps, 240 vac. QC spade terminals. 1-3/16" x 2-1/2" x 2-1/16" high overall. 2-1/8" c-c, 10 - 32 mounting holes. CSA, UL listed. 10,000 pieces available!!

Product Details:
Rockwell Frequency selector ganged push button assembly for the KWM-380 or HF-380. Positions 1, 3, 4, 5, 6 interlocked and position 2 momentary. Alt P/N: 6XF12-55DBLK2UGR NSN: 5930-01-271-2273.

Product Details:
Switchcraft 8 button multi-switch switch bank. New vintage surplus from Gates / Harris broadcast. New surplus in original box.

Product Details:
Switchcraft 10 button multi-switch. New vintage surplus from Gates / Harris broadcast. Gates / Harris P/N: 604-0569-000.

Product Details:
Oreor 9 button pushbutton bank. All buttons 3PDT. Red: independent, 3 Black: Linked, 1 Black: Independent, 4 Black: Momentary. 4-1/2"L x 2-3/4" deep. Made in France.

Product Details:
Switchcraft 8 position switch bank. Independent switches. 3-7/8"W x 5/8"D. 1-1/2" behind panel depth. Each switch is 4PDT.

Product Details:
Switchcraft 8 position switch bank. Ganged. Only 1 switch is "ON" at a time. each switch is DPDT. 3-7/8"W x 5/8"D, 7/8" behind panel depth.

Product Details:
4 gang pushbutton bank switch. Independently operated. 3/8" centers, 1-3/4" overall length. No manufacturer markings.

Product Details:
Mossman 8 gang pushbutton bank. Amber buttons. Broadcast quality. Interconnected, maintained. 3 switches are DPDT, 5 switches are DPST, N.O. 6-1/2" wide x 1-1/4", 2-3/4" behind panel depth. 6" c-c mounting holes. 0.426"D amber buttons. DC: 75+. Gates surplus.

Product Details:
Mossman 8 gang pushbutton bank. Ivory buttons. Broadcast quality. Interconnected, maintained. 3 switches are DPDT, 5 switches are DPST, N.O. 6-1/2" wide x 1-1/4", 2-3/4" behind panel depth. 6" c-c mounting holes. 0.426"D ivory buttons. DC: 75+. Gates surplus.

Product Details:
Mossman 8 gang pushbutton bank. Red buttons. Broadcast quality. Interconnected, maintained. 3 switches are DPDT, 5 switches are DPST, N.O. 6-1/2" wide x 1-1/4", 2-3/4" behind panel depth. 6" c-c mounting holes. 0.426"D red buttons. DC: 75+. Gates surplus.

Product Details:
UID 10 position pushbutton switch bank. Maintained - On / Off. 1" switch centers. 9-1/2"" x 1" + post. 0.15" x 0.192" post.

Product Details:
Push-lock/Push-release. 2-C per station, push-lock/push-release. 2.81" Mounting centers, steel plated frame/housing. 3.25" L x 0.75" W x 1.5" H. Made in USA.

Product Details:
7 button switchbank. 6 ganged, ON/OFF maintained. 1 (end) momentary. 4-3/8" L x 2.25" total depth (1-3/8" behind panel).

Product Details:
Chrome button push bank. Inside middle switches are linked - push one and the other one pops out. Both are 4PDT at 1 amp. Outer switches are maintained independent. Both DPDT. One is 6 amp at 250v. The other is 1 amp. 2-1/32" button centers. 2-13/16" mounting centers. 1-1/2" behind panel. UL listed. Chrome button 5/16" diameter.

Product Details:
Five button bank switch. Lighted. Top button: Maintained, Yellow "Spare". 2nd button: Momentary, White, "Spare", 3rd button: Momentary, Orange, "Recall", 4th button: Momentary, White, "Signal", 5th button: Momentary, Red, "Hold". Lamps included, midget "327", 28 vdc. Connector: 36 pin Centronics. 3-3/4" x 1" x 3-1/2"H. Mounting centers: 3.44" x 0.446".