Small AC Motors

Product Details:
Tachtronic Instruments 110v AC, 50-60 Hz 1.75" diameter motor with molded mounting plate, 1.86" diameter, squared on top and bottom to 1.75", has 3 threaded 6-32nd mounting holes 1-27/64" c-c. 1" diameter x 1/4" thick raised ring (0.1"H) surrounds shaft area. 2" body depth, 2.4" overall depth including 0.4" long splined shaft. 0.12" diameter shaft with 9 teeth. 2875 rpm full load, 0.41 oz-in. Stall torque. Continuous duty rated. 4 wire, 2 coil (see image for wiring diagram). Requires 0.75 MFD start capacitor. Alt P/N: SM-C-108895. NSN: 6105-00-5375-971.

Product Details:
Evaporator fan motor. 115v, 60 Hz, 0.20 amps, 3000 rpm single speed. 1/200 HP. 1/8" diameter shaft, 7/8" long. 2.4" long x 3.1" wide (with shaft) x 2.9"H overall. 1-7/8" c-c mounting holes. GE model WR60X84.

Product Details:
Papst-Motoren KG AC motor. 115v, 60 Hz. 2.96" diameter. 1/4"D x 3/4"L shaft. Requires 6 µF capacitor.

Product Details:
Gould shaded pole motor. Type B-FTP. Thermally protected. 1/70 HP, 3000 rpm, 120v, 60 Hz. CWSE rotation. C frame. Self lubricating. Dimensions: 2-3/8"W x 3"H x 1-15/16"D. Two 8-32 mounting studs, 1-7/8" c-c. 0.217" diameter x 0.913" long shaft.

Product Details:
WSM motor with electric rotary brake (24 vdc actuator). 115v AC, 60 Hz, 0.4 amps. 5/16" x 1-3/4" shaft. 4-5/8" x 4-3/4" x 3-3/4" high. Includes 7 µF capacitor. 4 pin power plug can be removed.

Product Details:
Dayton 230v AC, 0.6 amp, 60 Hz, 1/30 horsepower, 1 phase shaded pole motor has 5/16" x 2" shaft. 3000 nameplate RPM, rotation CW, body dia. 3.3", 2-7/8" center - center on mounting studs. Sleeve bearings. New in the box.

Product Details:
A.O. Smith shaded pole appliance motor. Cast iron housing. 1,550 rpm, 230v AC, 0.27 amps, 9 watts, 60 Hz. CCWLE (counter-clockwise lead end) rotation. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed.

Product Details:
Ashland torque motor. 1100 rpm / 117v / 60 Hz / 0.9 amps. 1 ph. 1/40 NOM HP. Cap. 4.0 µf-330vAC (not incl.) Tapped heads each end 2.62" mounting centers. Double ended shaft. 0.314"D shaft x 2.37"L / 0.3"D "D" shaft x 0.75"L. This item is the same motor as (MOT) 822-1A-172, which is the OEM Ampro / Scully part number.

Product Details:
Barber Coleman motor. Continuous duty, undirectional, no load. 2400 rpm, 115v AC, 60 Hz, 0.15 amps, 9.5 watts.. 1/8" DIA x 3/4"L shaft. 2-5/8"W x 2-7/16"H x 2-3/8"D. Weight: 15 oz. 2 mount studs 2-1/32 c-c 11/16" below shaft. We have been told by our customers that this motor is a suitable replacement for antique Zephyr model fans.

Product Details:
WSM motor with electric rotary brake (24 vdc actuator). 115v AC, 60 Hz, 0.4 amps. 5/16" x 1-3/4" shaft. 4-5/8" x 4-3/4" x 3-3/4" high. Includes 7 µF capacitor. 4 pin power plug can be removed.

Product Details:
Ampro / Scully torque motor. OEM vintage, New! 117v, 0.9 amps. Requires 4 mF, 330v AC capacitor (not included). Shaft 1 = 2.37"L, shaft 2 = 0.75"L. This is the same motor as (MOT) 2033920-01 which was manufactured by Ashland. Used in Ampro / Scully R2R equipment, among others.

Product Details:
Fasco 1 phase AC motor. 115v AC, 50/60 Hz, 2.5/2.2 amps, 1300/1600 rpm. Sealed ball bearings. Requires capacitor. 3-3/8"D x 4.22"L. 3/8"D double shaft, 1.2"L. Mounting wings @ 120º. Fasco typ: U64B1.

Product Details:
Fasco 3 phase AC motor. 230v, 60 Hz, 1.3 amps, 3200 rpm. Sealed ball bearings. 4 mounting studs, 2" c-c on each end. 3-3/8"D x 5.5"L. 0.373"D x 3.5" / 1.4" double shaft. Fasco type: U67B1.

Product Details:
Bodine 1/25 HP AC motor. 1800 rpm, 230v AC, 1 phase, 0.46 amps, 60 Hz. Hysteresis synchronous motor, thermally protected. 4 tapped head mounting holes, 2.68" c-c. 4.26"D x 5.5"L body. 0.345"D x 1"L flatted shaft.

Product Details:
Fasco 1 phase AC motor. 230v, 50/60 Hz, 0.70 / 0.85 amps, 2800/3300 rpm. Sealed ball bearings. Requires 5 µF, 370v capacitor (includes CFO-45F1450). 3-3/8"D x 3-3/4"L body. Two 0.309" diameter D" shafts, 1-3/4" L and 1-1/2" L from the face to shaft end. 4 mounting studs on 2" centers.

Product Details:
General Electric 1 phase AC motor. 1550 rpm, 1/15 HP. 1 phase. 120v, 60 Hz, 2.5 amps. CCW rotation. 3-3/4"D x 3-5/8"L. 5/16" x 1-1/2" shaft. 1-15/16" mounting centers on 4 head bolts. 4 wires (red, white, black, blue-green) may require capacitor.

Product Details:
General Electric AC motor. 1500 rpm, 1/8 HP, 115v, 60 Hz, 1 phase, 3.5 amps. 4 wires: black, white, red, blue. May require capacitor. 4-7/8"D x 3-1/2"L. 1/2" x 1-3/4"L shaft. Shaft end CW rotation. 3-3/16" x 3-3/16" stud centers. Alt. P/N: 22165.

Product Details:
Magnetek AC motor. 220v, 50/60 Hz, 0.73 amps, 2500 rpm, 0.03 HP. Ball bearings. 3-1/2"D x 3-1/2"L. 5/16" x 1-1/4"L shaft. 2" mounting centers on face studs.

Product Details:
Fasco AC motor. Type V62. 230v, 50/60 Hz, 0.77 amps, 2700 / 3200 rpm. Sealed ball bearings. 3-1/2"D x 3-7/8"L. 5/16"D x 1-1/2"L shaft. 2" x 2" mounting centers. Requires capacitor. Shaft is rusty.

Product Details:
Bodine K-2 series AC induction motor. Model 709. Enclosed, non-ventilated, permantently lubricated. 1,800 rpm, 0.6 oz-in torque, 1/900 HP, 115v AC, 60 Hz, 1 phase, 0.091 amps. 1.3µF capacitor included. New in the box!!

Product Details:
John Oster AC motor. Type 20U-8750-01.07200 rpm, 1/130 HP, 110v AC, 60 Hz, 0.2 amp. 1-7/8"D x 3-1/8"L body. 0.25" double flat shaft, 0.69"L. 1.14" mounting centers, 4 tapped face threads. Circa 1959. Packed in foil pouches. A-OK! NSN: 6105-250-5131.

Product Details:
Fasco AC motor. 1550 rpm, 208v, 60 Hz, 0.68 amp. Type 92B1. Sealed, ball bearings, thermally protected. Most commonly used in HVAC / R applications. Double shaft, 1 flat, 1 round.

Product Details:
Universal Motor Co. vintage fan motor. 1550 rpm, 115v, 50/60 Hz, 0.38 amp. Ball bearings. 30" wire leads. 3-1/4"D x 1-7/8"H. 1/2" mounting screws (x2). 3/4" threaded shaft for fan blade assembly attachment. Mfg. Owasso, Michigan. NOTE: Should be dismantled and lubed before use.

Product Details:
Fasco Type U63 appliance motor. 1300/1550 rpm, 115v, 1.15 amp, 50/60 Hz. Sealed ball bearings. Thermall protected. 3-1/4"D x 2-1/2"H. 1"L shaft x 0.312"D. 4-3/8" mounting screws on 2" centers. 24" leads. New, old stock. Slight oxidation on shaft and housing.

Product Details:
ESP Enterprises appliance motor. 1745 rpm, 115v, 60 Hz, 0.37 amps. Impedance protected. 4-5/16" x 3-3/8" mounting bracket centers. 0.250" x 0.575:L shaft.

Product Details:
GI shaded pole motor. 230v, 50 Hz, C-Frame. Main shaft slotted to accept impeller. 3 tier shaft, 0.180"D, 0.150"D, 0.119"D. 1.13" overall length. 2-1/2" x 3" x 1-1/2" deep.

Product Details:
Barber Coleman AC gear motor. 78 rpm, 115v, 50 Hz, 10w, 1.5 lb / in. 2-1/2" mounting centers. 2-5/8" deep. 1/4" x 3/4" shaft.

Product Details:
Barber Coleman AC gear motor. 93 rpm, 115v AC, 60 Hz, 16w, 1.3 lb inc. 2-5/8" deep, 2-1/2" mounting centers. 1/4" x 3/4" shaft.

Product Details:
Somfy tubular motor. Commonly used for electric blinds. 120v AC. 88 in / lbs torque @ 30 rpm. 21"L, 1-1/2" round.

Product Details:
Fasco Type U63B1 AC motor. 230v, 50/60 Hz, 1750 rpm unloaded, 0.5 / 0.45 amp. Open ventilation. Thermally proteced. 4 mounting wings 1" x 0.75" x 0.48"D hole. Sealed ball bearing. 1.25"L x 0.31"D shaft. Flatted at top (1"). Body measures 3.25" outside diameter x 3"H. 4.25" overall height. New surplus.

Product Details:
Delco 3 phase AC motor with centrifugal clutch. 115v AC @ 0.27 amps, 60 Hz, 3 phase or 50v AC @ 0.50 amps, 50 Hz, 3 phase. 4-1/4"D x 6-1/2" overall length. Made in 1942 by Delco, a GM division. Packed in waterproof boxes and perfectly preserved. Alt. P/N: C78432.

Product Details:
John Oster AC motor. Type 20U-8750-01.07200 rpm, 1/130 HP, 110v AC, 60 Hz, 0.2 amp. 1-7/8"D x 3-1/8"L body. 0.25" double flat shaft, 0.69"L. 1.14" mounting centers, 4 tapped face threads. Circa 1959. NSN: 6105-250-5131.

Product Details:
Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 14.5 watt. 20 oz/in torque. Ball bearings. Series 73mm. 1/4" x 9/16" "D" shaft. 2-7/8"D x 1.84"L (73mm x 46mm). 2-1/4" c-c- mount ears on four corners. Model RA-ET. 1.3 uf cap included. 30 pc/case.

Product Details:
Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 9 watt. 10.2 oz/in torque. Ball bearings. Series 59mm. 1/4" x 2" round shaft. 2.62" c-c- mount holes on diamond plate. ZP style, model SC. 0.85 uf, 250v AC cap included. 30 pc/case.

Product Details:
Hurst reversible direct drive motor. Permanent magnet AC synchronous. 115v AC, 300 rpm, 60 Hz, 9 watt. 10.2 oz/in torque. Ball bearings. Series 59mm. 1/4" x 3/4" "D" shaft. 2.62" c-c- mount holes on diamond plate. ZP style, model SC. 0.85 uf, 250v AC cap included. 30 pc/case.

Product Details:
1/30 HP fractional horsepower motor. 115 volts, .86 amps, 60Hz, 900 rmp. 9"L 5"D x 1.85" shutt length, 0.375" shaft diameter x 1.5"L. Req 11uF capacitor, vintage production.