22 Volt to 30 Volt Power Supplies

Product Details:
Attention Hummvee / Hummer Owners!!
Convert 24v DC to 12v DC

Brand new in the box Sure Power DC-DC converters. Input is 24v DC nominal and output is half the input at up to 25 amp.

Use for a brute 12v DC supply or as a multi-voltage management system. Charge single and multiple 12v battery banks. Fused input and outputs. Voltage trim. Negative ground. 6-5/8" x 8-5/8" x 2-1/2" high. New!!! 100 in stock. NSN: 6110-01-348-6621.

Product Details:
TDK-Lambda power supply. New in box with manual. ROHS compliant.

• Input: 100-240v AC
• Output: 24v DC, 10 watt @ .42 amps
• Dimensions: 3-1/2"H x 11/16"W x 2-3/16" deep

Product Details:
Powerful Vicor Mini-Mod DC-DC converter. Generates 50 watts of 12v DC power with 24v DC input. Input range 18-36v DC. Remote sense, current limit, (UL, CSA, TUV, VDE, BABT) approved. 2-5/16" wide by 2-3/8" deep by 1/2" high body (+ 1/4" terminals). Aluminum heatsink base. Solder terminals on top. Factory packaging is 2 per container. Will separate. New.

Product Details:
Condor linear supply in open frame chassis. 0.05% line and load regulation. Auto current limit and fold back. Used.

• Input: 100 / 120 / 215 / 230 / 240 vac @ 1.4 amp, 1.2 amp and 0.6 amp respectively, 50/60 Hz
• Output: 24v DC @ 2.4 amp
• Dimensions: 5-5/8" x 5" x 2-3/4" deep

Product Details:
Sola linear power supply in open frame chassis. 0.05% line and load regulation. Ripple: 3.0 mV maximum peak-to-peak. 24v DC ± 5% at 3.6 amp out. Voltage & current limit adjustments sealed. Jumpered for 100/120v input. 7 lbs.

• Input: 100 / 120 / 220 / 230 / 240 vac selectable ±10% except 230 is +15%, -6%
• Output: 24v DC @ 3.6 amp.
• Frequency Range: 47-63 Hz. (Typical is 60 Hz derate output 10% at 50 Hz).
• Transient Response Time: 50 µSEC at 50% load changes for outputs rated to 6 A. 100 µSEC at 50% load changes for outputs rated 6 amp and over.
• Dimensions: 7" x 5" x 3-1/2"

Product Details:
Soundolier husky power supply. Non-regulated but plenty of room to add a circuit. Ventilated cabinet top. Fused, terminal strip outlet. NSN: 6130-01-073-8768.

• Input: 117 vac
• Output: 24v DC @ 5 amp
• Dimensions: 5-1/2" x 7" x 11" deep

Product Details:
100/120/220/230/340v 47/63Hz single phase input. 24v DC, 7.2 amp, 170w linear regulated output. Open frame. 14"L x 4.13"W x 2.75"H, 10lbs. Meets UL, CAS TUV standards.

Product Details:
Technipower, a new, awesomely brutal power supply. Brick solid... as a battery. 105-125 vac, 50-70 Hz input yields a ultra conservative, pure 24.1v DC @ 12 amp out nominal. Trimmable 23 - 25v DC. Will not dip, sag or give in. 45 pounds. Hermetically sealed. 4-7/8" x 7" x 13" long.

Product Details:
Kepco, variable supply with dual meters. 0-25v DC, 0-10 amp, front panel adjustable voltage and current limiting, dual meters. Binding post outputs on rear. Used, repairable, not working, rough condition. Sold as-is.

• Dimensions: 4-3/4" x 8-1/8" x 17-3/4"L

Product Details:
PowerOne multi-voltage switcher power supply. Power factor correction design. New, old stock. OEM $300 each.

• Input: 100 - 240v @ 6 amp, 50 / 60 Hz
• Output: 5v @ 35 amp, 24v @ 6.8 amp, 15v @ 4.8 amp, 15v @ 4.8 amp
• 300 watts max
• Terminal strips and leads
• Individual test results
• Dimensions: 9" x 5" x 2-1/2"

Product Details:
UPS - Standby power supply. This milspec Austron supply provides a constant 24v DC, even in the event of power outage. Brand new in original boxes. Includes manual.

• Input: 115 / 230 vac, 50-1000Hz
• Output: 24vdc ± 2v @ 3 amp
• Requires two 12v, 20 a.h. Gelcells NOT INCLUDED!!
• Meters: 0-40v DC ± 5 amp DC
• Alarm contacts: SPDT 5 amp
• Weight: 55 lbs (with batteries)
• Dimensions: 19" rack width x 19"D x 5-1/4"H

Product Details:

NEW, removed from CELL-LOC outdoor cabinet, never put in service. Switching Power Supply made by Prologic Controls is made up of five 10 amp internal supplies. The PLC-2450 has 5 modules internally daisy chained and rated @ 50 amp. Output terminals L1 and L2 provide full output to power equipment. Output terminals B1 and B2 connect to external batteries to charge them when ac power is available and automatically provide battery power to the load when ac power fails.

DB-25 on rear panel provides module status outputs, temperature fault output, dc output and 5v DC at 250 mA.Mounting holes show wear from mounting screw removal.

Uses include:

1. Battery charger for pair of 12v (13.8v nominal) batteries in series. Thismakes a bullet proof 28v DC power supply.

2. DC Power Supply: Fixed voltage, trimmable ± 5% for up to 50 amp output.

• Input: 105 - 125 vac, 60Hz
• Output: 27.6v DC - 1% regulation, 50 amp continuous, 55 amp surge, 60 amp current limit, 60mv output ripple
• Forced air ventilation - 2 fans
• Short circuit protection
• Surge suppression
• Module fuses: Unit 20 amp breaker / switch
• Heavy duty AC Line cord
• Dimensions: 19" x 14" x 3.6"
• Weight: 23 lbs

Product Details:

N + 1 Power Systems power supply and back-up battery charger.

Switching power supply made up of five 10 amp internal supplies. All modules are internally daisy chained and routed to external binding posts. Output terminals L1 and L2 provide full output to power equipment. Output terminals B1 and B2 connect to external batteries to charge them when ac power is available and automatically provide battery power to the load when ac power fails. Battery charging current is limited to 8 amp and tapers off as batteries come up to full charge.

Includes front panel module status LEDs, temperature fault LED and switch-selectable analog metering of output voltage or current. DB-25 connector on rear panel provides module status outputs, temperature fault output, dc output and 5v DC at 250 mA.

Removed from service. Batteries not included.

• Input: 105 - 125 vac, 60Hz
• Output: 27.6v DC - 1% regulation, 50 amp continuous, 55 amp surge, 60 amp current limit, 60mv output ripple
• Forced air ventilation - 2 fans
• Short circuit protection
• Surge suppression
• Module fuses: Unit 20 amp breaker / switch
• Heavy duty AC Line cord
• Dimensions: 19" x 14" x 3.6"
• Weight: 23 lbs

Product Details:
Same as (PS) PLC-2450/R except NEVER INSTALLED. Supplied in original shipping carton.

Product Details:
Lambda regulated power supply. Used.

• Input: 105 - 132v, 47-63 Hz
• Output: 28v DC @ 1 amp, 5%
• Dimensions: 3-3/4" x 6-1/2" x 3"H

Product Details:
Emerson Vortex network power supply. Brand new in factory box.

• Input: 208/240v AC, 21-18a, 50/60 Hz
• Output: 28.5v DC @ 130 amp
• Dimensions: 9-1/2" x 5" x 14"

Product Details:
Variac (3 section) controlled selenium supply. 3 phase 230vac input. Metered at 32v DC and 100 amp but don't know operating parameters. Sold as is. Weighs about 200 pounds. 28" x 16" x 18" high.

Product Details:
LORAIN Flotrol Rectifier is an industrial battery charging / monitoring device. Lots of cool parts too. Large low voltage transformer, rectifiers, filter caps, voltage and current meters. Input in 120 vac @ 8.75 amp. Rack width @ 19" x 24-1/4" high x 13" deep. Used, removed from service but appear to be in good, working condition.

Product Details:
Technipower unregulated mil-spec power supply. Hermetically sealed. Terminals and six 1/4-20 studs on bottom. No box or contract. NSN: 6130-00-499-0735.

• Input: 105 - 125 vac, 50 / 400 Hz
• Output: 28v DC @ 12 amp
• Dimensions: 5" x 13" x 7"H

Product Details:
Acopian dual voltage DC regulated power supply. Octal base plug. NSN: 6130-00-179-9252.

• Input: 105 - 125 vac
• Output: 28v DC each (adjustable) @ 400ma
• Dimensions: 4.15" x 4.85" x 3.3"

Product Details:
Technipower power supply. 28.0v DC (trimmable) @ 3 amp. Input: 105-125 vac, 50-420 Hz. Hermetically sealed. Terminals and four 1/4-20 mounting studs on bottom. 5" x 6-1/2" x 7" high. No box. DLA400-83P-6758.
NSN: 6130-01-138-4181.

Product Details:
Power / Mate Corp. power supply. Hermetically sealed. No regulation. Needs external filter cap.

• Input: 115 vac, 47-420 Hz
• Output: 30v DC @ 750 ma
• Dimensions: 3-1/2" x 4" x 5-1/4"

Product Details:
Tecnetics power supply. Input and output terminal strips. Voltage sense circuit. NSN: 6130-01-045-7968.

• Input: 115v AC, 400 Hz
• Output: 28v DC @ 3.6 DC amp, adjustable 100 watt
• Dimensions: 4" x 6" x 2"H

Product Details:
Advance power supply.

¢¢ Input: 110 / 220v @ 10 amp / 5 amp
¢¢ Output: +28v DC @ 10 amp, -28v DC @ 5 amp, -28v DC @ 5 amp, -28v DC @ 5 amp
¢¢ Dimensions: 7-1/2" x 12" x 2-3/4"H

Product Details:
Lambda 200w regulated power supply. 24v DC ±5% (22.8 - 25.2v DC) @ 3.8 amps. Line and load regulation: 0.1%.

• Input: 105 - 127v / 210 - 250v @ 117 - 63 Hz
• Dimensions: 4-15/16" x 7"

Product Details:
Kepco precision, bench / lab, regulated variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard rear panel "barrier" type terminal strips. in addition, rear panel connections are provided for remote sense capabilities. Includes copy of the instruction manual.

• Output: 0 - 25 volts @ 0 - 4 amps
• Dimensions: 18" x 4" x 5"H

Product Details:
Leader precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 25v @ 0 - 1 amps. These two supply outputs can track each other providing ± supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. The power supply also provides an additional single 0 - 6v @ 0 - 5 amps output with constant voltage and / or constant current modes. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Includes operation and service manual.

• Single Output: 0 - 6v @ 0 - 5 amps
• Dual Output: ±0 - 25v @ 0 - 1 amp each
• Dimensions: 15" x 8.5" x 6"H

Product Details:
Hewlett Packard precision, bench / lab, ultra-regulated, variable DC power supplies with analog volt / amp metering. Two power supply outputs will provide ± supply rails with selectable "tracking" or can be used independently and in series for greater voltage or in parallel for greater current output. With variable fine and coarse control knobs for voltage and current adjustments. In addition, this power supply includes the optional adjustable over-voltage "crowbar" protection feature (option O11). The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections are also provided for remote sense and voltage programming / tracking capabilities. In addition, this power supply includes the over-voltage protection option. Includes copy of the operation and service manual.

• Dual Output: 0 - 25v @ 0 - 2 amps each
• Dimensions: 13" x 8" x 6.5"H

Product Details:
EMI Lambda brand (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.

• Input: 190 - 250v @ 20/13 amps, Single or 3 phase, 50/60 Hz
• Output: 0 - 30v @ 0 - 80 amps
• Dimensions: 21" x 19" x 3.5"H

Product Details:
Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. In addition, this power supply includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.

• Input: 190 - 253v AC @ 28 amps, 3 ph, 47-63 Hz
• Output: 0 - 25v @ 0 - 400 amps
• Dimensions: 25" x 19" s 5.5"H

Product Details:
Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. This compact 6.6 kw power supply is the ideal piece of professional test gear for your bench to check out and evaluate any electronic or electrical equipment that operates on voltages up to 30 volts and draws as much as 220 amps. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.

• Input: 190 - 253v AC @ 28 amps, 3 ph, 47-63 Hz
• Output: 0 - 30v @ 0 - 220 amps
• Dimensions: 26" x 19" x 5.25"H

Product Details:
Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. The digital meters provide accurate readings of both nel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.

• Input: 190 - 253v AC @ 28 amps, 3 ph, 47-63 Hz
• Output: 0 - 30v @ 0 - 330 amps
• Dimensions: 25" x 19" x 5.25"H

Product Details:
Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.

• Input: 190 - 253v AC @ 26 - 22 amps, 47-63 Hz
• Output: 0 - 30v @ 0 -100 amps, 3kw
• Dimensions: 21" x 19" x 3.5"H

Product Details:
Lambda Dinrail power supply. 24v DC @ 20 amps.

Product Details:
Power One switching power supply. 24v DC @ 21 amps output. Input: 85 - 250v AC @ 50/60 Hz. 9-3/4" x 5" x 2-1/2"H. Brand new in the box!

Product Details:
Linear power supply. TA110-WRF.

• Primary: 120v AC
• Output: 21v DC @ 1 amp / 27v DC @ 1 amp

Product Details:
Power One linear power supply. HE24-7.2-A.

• Input: 100 - 264v AC
• Output: 24v DC @ 7.2 amps / 173 watts
• Dimensions: 4-3/4" x 14" x 2-3/4"H

Product Details:
Power Solutions switcher power supply. RoHS.

Product Details:
Kepco Precision Bench/lab Variable DC Power Supply. 0-25v DC @ 0-4 amps. Analog for precise voltage & current adjustments. Rear barrier strip allows remote sense & voltage preogramming/tracking. 18" x 4" x5"H

Product Details:
H.P. 6216 C power supply. 0 - 25v, 0 - 400 ma. 5 1/4" x 3 1/4" x 7"L. Binding post terminals.

Product Details:
Kepco JQE 0 - 25v, 0 - 10 amp. 18" x 8" x 5" tall. 100% tested voltage / load good. Regulated, variable DC power supply with analog v/a meters. 10 - turn knobs for precise voltage and current adjustments. Front and rear 5 - way binding post connections.

• Input: 0 - 25v AC
• Output: 0 - 25v DC @ 0 - 10 amps
• Dimensions: 18" x 8" x 5" tall