13 Volt to 21 Volt Power Supplies

Product Details:
Agilent 6950L-T60, 5,000 watt DC supply. Front panel rotary and keypad controls. Also controlled via GPIB and analog signals. Over voltage and current protection programmable. Specs and operations similar to 6680A series supplies. New, unused condition.

Product Details:
General DataComm Industries GPS-1A/1B power supply. A rack mountable power supply that is pretty much useless in today's world. Input voltage = 120 vac. Outputs: 5 vdc @ 16 amps, +12 vdc @ 4 amps & -12 vdc @ 4 amps.

Product Details:
Powermate metered power supply. 0 to 20v @ 0 to 12 amps. Voltage and current limit metered. Binding posts on front. Checked out OK.

• Dimensions: 8" x 18" x 5-1/2"H
• Weight: 27 lbs

Product Details:
Lambda metered power supply. 0 to 20v @ 0 to 15 amps. Front voltage and current adjust. Coarse & Fine. Terminals on rear. NICE!! Checked out OK.

• Dimensions: 5-1/4"H x 8-1/4"W x 18"L
• Weight: 37 lbs

Product Details:
Lambda power supply. 250 watts.

• Input: 85 - 265 vac @ 47 / 63 Hz
• Output: 15 vdc Nominal (14.25v - 15.75v) @ 16.7 amps / 250 watts
• Dimensions: 4.75" x 1.77"H x 9.5"L

Product Details:
Electronic Measurements Inc. power supply. Front panel voltage and current limiting / digital voltage and current meters. Can be remoted by rear terminal strip. 10 turn voltage adjustment, 1 turn current limit. Includes manual. NOTE: Units are set for 230 vac operation. Easily changed to 115 vac via internal jumper (included).

• Input: 115 & 230 vac @ 15 amps, 47/63 Hz
• Output: 0 to 20 vdc @ 0 to 50 amps DC
• Dimensions: 17" x 17" x 1-3/4", 19" rack mount

Product Details:
Black & Decker power supply. 16 vdc @ 4 amp nominal. Trimmable 12.6-14 vdc. Front panel control - voltage trim. Output jack - polarized. 6-1/2" x 3-3/4" deep. 3-3/8"H.

• Input: 120 vac, 60 Hz, 0.6 amp

Product Details:
Sorensen power supply. Front panel and remote voltage and current limit controls. Digital voltage and current meters. Both controls are 10 turn. Remote via rear DB-25. Includes manual. NOTE: Units are set for 230 vac operation. Easily changed to 115 vac operation via internal jumper (included).

• Input: 115 & 230 vac, 50/60 Hz
• Output: 0 to 20 vdc @ 0 to 50 amps
• Dimensions: 17" x 17" x 1-3/4", 19" rack mount

Product Details:
Global Specialties power supply. 3 outputs. Series or parallel independent supplies.

• Input: 115 vac / 230v
• 1 Output: Adjustable +5 vdc @ 1 amp
• 2 & 3 Outputs: 1.3 - 18v @ 0.5 amps

Product Details:
Power One power supply. 5v @ 6 amp wOVP. Brand new. NSN: 6130-01-053-5223.

• Input: 100v, 120v, 230v, 240v
• Output: ±12v @ 1.7a or ±15v @ 1.5a

Product Details:
Scientific Radio power supply. Leads and connector. No covers. Basler transformer. Includes schematic & parts list. Requires business machine AC cord. NOTE: Tested @ 30 amp output.

• Input: 105 / 115 / 125 or 210 / 230 / 250 vac
• Output: 12 vdc @ 35 amps
• Dimensions: 13-1/2" x 4-3/4" x 14"D

Product Details:
Scientific Radio power supply. Current and voltage meter. Used.

• Input: 105 to 135 vac, 60 Hz
• Output: 13 to 14 vdc, 0 to 20 amps or more
• Dimensions: 19" rack width x 5"H x 18"D behind the front panel

Product Details:
Astron RS-12A power supply. Removed from service.

• Input: 105 - 125 vac
• Output: 13.8 vdc @ 9 amps continuous, 12 amps ICS, Tested to 11.3 amp output
• Dimensions: 4-1/2" x 8" x 9"
• Weight: 13 lbs

Product Details:
Purcell Systems "25 watt Switcher" power supply.

• Input: 100 - 240 vac, 50 - 60 Hz, 0.2 amps
• Output: 13.8 vdc @ 1.2 amps, 13.8 vdc @ 0.7 amps
• Dimensions: 2-1/2" x 6-7/8"L x 1-3/8"H

Product Details:
TDK Lambda switching power supply. New in box with instruction manual.

• Input: 100-240v AC @ 0.5 amp, 50/60 Hz
• Output: 15v @ 1 amp, 15 watts
• Dimensions: 3-3/16" x 3-11/16" x 1-1/4"H

Product Details:
TDK Lambda power supply. New in box with instruction manual.

• Input: 100-240v AC @ 1.4 amp, 50/60 Hz
• Output: 15v @ 7 amp, 100 watts
• Dimensions: 3-1/4" x 7" x 1-1/4"H

Product Details:
Polytron Devices sealed PCB mount power supply. Short protected by internal 1/4" amp slow blow.

• Input: 105 - 125v AC, 50-60 Hz
• Output: +15v DC @ 350 ma, -15v DC @ 350 ma, Shared common
• Dimensions: 2.5" x 3.5"L x 1.62"H

Product Details:
Analog Devices dual power module. 2-1/2" x 3-1/2" x 1-1/4" high.

Product Details:
Semiconductor Circuits regulated power supply. Space Lab spare part. ±15v @ 200 ma. 2-1/2" x 3-1/2" x 1-3/8".

Product Details:
Acopian OpAmp dual power supply. 4.5 amp @ 40ºC, 3 amp @ 71ºC. ±15v, ±0.5v. Brand new.

• Dimensions: 5-1/8" x 3-1/2" x 14"

Product Details:
Lambda, BRAND NEW supply but NO meters. 18 vdc trimmable ±5% @ 16.5 amps. 105-132 vac input.

Product Details:
Xantrex power supply. Dual LED voltage and current meters. Front panel voltage and current adjust. Remote control via analog GPIB or RS232.. Front panel control of OVP set points. Includes manual. Axcelis P/N: 210000215. Brand new!!

• Input: 100 / 120, 200 / 240 vac, 47-63 Hz
• Output: 0 to 20 vdc @ 0 to 60 amps, 1,200 watts
• Dimensions: 19" x 1-3/4" x 21"
• Weight: 18 lbs

Product Details:
Yes, we still have a good supply of this new, wonderful deltron triple voltage open frame linear supply. So versatile. Trim the 15 vdc fundamental supplies on the circuit board. 12-16v or remote mount a 10 turn 5k ohm pot ((RWV) 35208-5K) and turn it into a 7-30v regulated lab supply. It's simple to do. Instructions included. Series or parallel the two supplies for a combined 7-60v @ 2.5-5 amps. Board trimmable current limiting too. New, boxed, from Collins surplus. 10 pounds each. 3-1/4" x 5" x 11" long.

Product Details:
Hewlett Packard metered power supply. 0 to 20v, 0 to 45 amps. Up to 3 amps @ front. 45 amps @ rear panel. 115 vac input. Metered front panel voltage & current limiting. 11 available. Checked out OK.

• Dimensions: 19" Rack - 19"D x 5-1/4"H
• Weight: 72 lbs

Product Details:
TCR metered power supply. 0 to 20v @ 0 to 30 amps. 105 to 125v input. 90mv maximum output ripple. Metered front panel voltage & current limiting. Remotely programmable on rear. DC posts on rear. Checked out OK.

• Dimensions: 19" rack width x 20"Dx 3-3/8"H
• Weight: 56 lbs

Product Details:
Lambda metered power supply identical to (PS) LK341A-FM except this unit modified to put out up to 7.5v only @ up to 7.5 amps.

Product Details:

Minicraft variable speed power supply. 6' AC cord, 2 prong. New in box.

• Input: 120 vac - 60Hz
• Output: 9-16VDC @ 1.7 amps
• Dimensions: 2-1/2" x 2-1/2" x 5"L

Product Details:

Hewlett Packard variable power supply. HP 6453A power supply.

• Input: 208 vac, 3 phase, 4 wire
• Output: 0 - 15 volts @ 0 - 200 amps
• Rack Width: 19"
• Weight: 240 lbs

Product Details:
Electrostatics Model 10-1515 power supply. Includes instruction sheet. Weighs 1.25 lbs. New, old stock. Never used. NSN: 6130-01-030-6082.

             
• Input: 105v AC, 50 Hz
             
• Output: ±15v DC @ 0.35 amps
             
• Dimensions: 4.5"L x 1.63"H x 4.5"W
             

Product Details:
Power Designs precision power source. 0 - 20v DC @ 0 - 500mA. Excellent condition. Source: Bogdan.

Product Details:
Lambda regulated power supply. American made linear (not a switcher). New, unused.

• Input: 95 - 132v @ 47 - 63 Hz, 511 watts
• Output: 15v DC @ 25 amps ±5%, 325 watts
• Dimensions: 3-3/4" x 4-3/4" x 12" overall length

Product Details:
Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The DC supply provides, 0 - 20v @ 0 - 3 amps, constant voltage and / or constant current. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.

• Output: 0 - 20v @ 0 - 3 amps
• Dimensions: 16" x 8.5" x 4"H

Product Details:
Hewlett Packard variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments, precision, bench / lab, regulated. Includes the adjustable over-voltage "crowbar" protection option. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming / tracking capabilities. Excellent condition.

• Output: 0 - 20 volts @ 0 - 10 amps
• Dimensions: 16" x 8.5" x 5.5"H

Product Details:
Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision a "ten turn" control knob for voltage adjustment, and knob for current adjustment. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Input: 190 - 250v AC, 60 Hz, 1 or 3 ph
• Output: 0 - 13v @ 0 - 200 amps
• Dimensions: 21" x 19" x 3.5"H

Product Details:
Power Ten brand (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. The DC supply provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.

• Output: 0 - 20v @ 0 - 30 amps
• Dimensions: 22" x 19" x 1.75"H

Product Details:
Acopian dual tracking power supply. ±0.1% line and load regulation with sense feature. Brand new!

• Primary: 105 - 125v AC, 50 - 400 Hz
• Output: ±15v DC @ 1.6 amps
• Dimensions: 3-1/2" x 5" x 7"L

Product Details:
Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The dual range analog meters provide accurate readings of both voltage and current. The output connections are front and rear panel 5-way binding posts, rear panel "barrier strip" type terminals. And rear panel connections are also provided for remote sense capabilities. Includes copy of the instruction manual.

• Output: 0 - 15v @ 0 - 12 amps
• Dimensions: 18" x 8-1/2" x 5.25"H

Product Details:
Lambda digital programmable precision, plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Direct entry keyboard for voltage and current adjustments. Constant voltage and / or constant current. This power supply includes the adjustable over-voltage "crowbar" protection option.

• Output: 0 - 18v @ 0 - 16 amps
• Dimensions: 15" x 4" x 4.5"H

Product Details:
Tektronix triple output precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. These two supply outputs can track each other providing ±supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. This is truly a laboratory grade power supply with hum and noise specifications measured in micro-volts and supply regulation accurate to ±0.01%. The tektronix CPS250 is a triple output precision regulated DC lab supply that can be utilized for any application in electronic circuit design or repair. Includes copy of operation and service manual.

• Single Output: 5v @ 0 - 2 amps
• Dual Output: ±0 - 20v @ 0 - 0.5 amps each
• Dimensions: 9" x 10" x 4"H

Product Details:
Hewlett Packard triple output variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 18v @ 0 - 0.2 amps and can track each other providing ± supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. Banana type 5-way binding posts. Used, but in excellent working condition. Includes operation and service manuals.

• Output: 0 - 6v @ 0 - 1 amps
• Output: ± 0 - 18v @ 0 - 0.2 amps
• Dimensions: 6-3/16"W x 3-1/2"H x 8"L

Product Details:
Power Designs precision, plating / anodizing, bench / lab, regulated, variable DC power supply (rectifier) with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Analog meter provides accurate readings of both voltage and current and the standard "banana" type 5-way binding posts on the front panel are provided for voltage output and monitoring purposes. In addition output connections on the rear panel are provided on a "barrier strip".and additional rear panel connections are provided for remote sense and voltage programming / tracking capabilities.

• Output: 0 - 20v @ 0 - 1.5 amps
• Dimensions: 13" x 8.5" x 5"H

Product Details:
EMI Lambda brand (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The analog meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Input: 190 - 250v, Single or 3 phase, 50/60 Hz
• Output: 0 - 20v @ 0 - 125 amps
• Dimensions: 23" x 19" x 3.5"H

Product Details:
Hewlett Packard dual output plating / bench / lab, regulated, variable DC power supply (plating rectifier) with analog volt / amp metering. Variable coarse and fine control knobs for voltage and a knob for current adjustments. The analog meters provide precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts, in addition, rear panel connections provide remote sense and voltage programming / tracking capabilities.

• Output: 0 - 20v @ 0 - 3 amps
• Dimensions: 16" x 19"w x 3.5"

Product Details:
Kikusui precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Ten turn fine adjustment control knobs for voltage and current adjustments. Includes copy of the operation manual.

• Output: 0 - 20v @ 0 - 100 amps
• Dimensions: 19" x 17" x 6"H

Product Details:
Lambda regulated variable DC power supply with analog volt / amp metering. Triple output, precision, bench / lab. One of the three outputs provides a single, 0 - 7v @ 0 - 5 amp output with constant voltage and / or constant current modes. The other dual outputs each provide 0 - 20v @ 0 - 1.5 amps. These two supply outputs can be interconnected on the rear barrier strip to track each other providing ± supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. standard "banana" type 5-way binding posts. Includes copy of manual.

• 1st Output: 0 - 7v @ 0 - 5 amp
• Dual Outputs: 0 - 20v @ 0 - 1.5 amps
• Dimensions: 11.5" x 12.5" x 5.5"H

Product Details:
Kepco bench / lab, regulated, variable DC power supply with analog volt / amp metering. This power supply provides a single, 0 - 15 volts @ 0 - 6 amps output with variable course and fine control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the rear panel high current output connections are provided with remote sense and voltage programming / tracking capabilities. Hum and noise specifications measured in millivolts and supply regulation accurate to ± 0.1%.

• Output: 0 - 15 volts @ 0 - 6 amps
• Dimensions: 18" x 4" x 5"H

Product Details:
Lambda precision bench / lab, regulated variable DC power supply with digital volt / amp metering. This power supply requires 190 - 250v AC, 60Hz, single phase or three phase power for operation. Precision "ten turn" control knob for voltage adjustment and knob for current adjustment. The DC supply provides, constant voltage and / or constant current. This power supply includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars" with additional connections provided for remote voltage sense and programming.

• Output: 0 - 14v @ 0 ¢ 185 amps
• Dimensions:20" x 19" x 3.5"H

Product Details:
Acopian Model VA15H1500 (A15H1500 with over-voltage option), 15 volts (adjustable +/- 0.5v) @ 15 amps, precision, bench / lab, regulated DC power supply. The input / output connections are a high current barrier strip. In addition, this power supply is "convection cooled" and does not utilize a cooling fan thereby greatly extending it's service life! This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to 0.01%.

• Output: 15v @ 15 amps
• Dimensions: 7-3/8" x 5-1/8" x 11-1/2"

Product Details:
Power Designs triple output, precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. One of the three outputs provides: 0 - 6v @ 0 - 5 amps or 0 - 15v @ 0 - 2.5 amps output with constant voltage and / or constant current modes. The other dual outputs provide, 0 - 25v @ 0 - 1 amp, or 0 - 20v @ 0 - 2.5 amps. These two supply outputs can track each other providing ± supply rails or can be used independently and in series for greater voltage. This power supply includes fully adjustable over-voltage "crowbar" protection (OVP) on every output! The output connections are standard "banana" type 5-way binding posts.

• Output: 0 - 6v @ 0 - 5 amps or 0 - 15v @ 0 - 2.5 amps
• 2nd Output: , 0 - 25v @ 0 - 1 amp, or 0 - 20v @ 0 - 2.5 amps
• Dimensions: 7-3/4" x 9" high x 13-1/2" deep

Product Details:
Acopian Model A15MT300 VA15MT300, (Same as A5MT600, "v" prefix = over-voltage option), 15v (adjustable +/- 0.5v) @ 3 amps, precision, bench / lab, regulated DC power supply. Variable control pot for +/- 0.5v adjustment. The DC supply provides, 15v @ 3 amps, constant voltage and current limit. The output connections are a rear panel high current barrier strip.

• Output: 15v @ 3 amps
• Dimensions: 3-1/2" x 5" x 7"

Product Details:
The Voltcraft FSP 1225 is a 375W fixed voltage switch mode power supply suitable for use in laboratories, workshops and industry. The FSP 1225 is highly efficient and produces 11 - 15v DC and 25 amps with a current limiter. The output voltage can be adjusted via the potentiometer on the PSU's underside. It's steel plate enclosure makes the FSP 1225 suitable for use even in demanding industrial conditions.

• Watts: 375 watts max
• Output: 11 ¢ 15v DC @ 25 amps
• Dimensions: 11" x 6" x 3"H

Product Details:
Hewlett Packard triple output precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 20v @ 0 - 0.5 amps. These two supply outputs can track each other providing ±supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. The power supply also provides an additional single 0 - 6v @ 0 - 2.5 amps output with constant voltage and current limit modes. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.

• Output: 0 - 6v @ 0 - 2.5 amps
• Dual Outputs: ±0 - 20v @ 0 - 0.5 amps
• Dimensions: 14" X 8.5" X 4"H

Product Details:
Hewlett Packard triple output precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 20v @ 0 - 0.5 amps. These two supply outputs can track each other providing ±supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. The power supply also provides an additional single 0 - 18v @ 0 - 1.0 amp output with constant voltage and current limit modes. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.

• Output: 0 - 18v @ 0 - 1 amp
• Dual Outputs: 0 - 20v @ 0 - 0.5 amps
• Dimensions: 14" X 8.5" X 4"H

Product Details:
Lambda analog meter module precision, bench / lab, ultra-regulated, precision variable DC calibration source power supply with analog volt / amp metering and digital voltage selection. 36 watt ultra-regulated DC lab supply that features an "ovenized zener reference" that can be utilized as a ultra-stable precision voltage source or for any application in electronic circuit design or repair. This unit is intended for use as a low-cost calibrator, working voltage standard, system reference supply and high performance lab power supply. This is truly a laboratory grade precision power supply with hum and noise specifications measured in micro volts and supply regulation accurate to ±0.0005% and stability of 0.001%! The precision voltage selectors and illuminated "digital readouts" provide an easy means to accurately and repeatability set the output voltage in one millivolt steps (0.1% +1mV accuracy!). Analog meter module provides precision readings of both voltage and current. The output connections are "mini banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.

• Output: 0 - 20v @ 0 - 1.8 amps
• Dimensions: 11" x 8.5" x 5.5"H

Product Details:
Power Designs precision, bench / lab, regulated, variable DC power supply / calibrator source with precision push button voltage selection and analog volt / amp metering. The precision voltage selector provides an easy means to accurately and repeatability set the output voltage in one millivolt steps (0.1% +1mv accuracy!) Supply regulation accurate to ±0.001%. The output connections are standard "banana" type 5-way binding posts. Also, rear panel connections provide remote sense and voltage programming / tracking capabilities. Includes copy of the manual.

• Output: 0 - 20v @ 0 - 2 amps or 0 - 10v @ 0 - 4 amps
• Dimensions: 10" x 8.5" x 5"H

Product Details:
Lambda precision bench / lab, regulated, variable DC power supply with digital volt / amp metering with variable fine and coarse control knobs for voltage and a precision control knob for current adjustments. Standard "banana" type 5-way binding posts. Rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities.

• Output: 0 - 20v @ 0 - 9 amps
• Dimensions: 5.25"H X 8.5"W X 17.5"D

Product Details:
Lambda dual output precision bench / lab, regulated, variable DC power supplies with digital volt / amp metering. Variable fine and coarse control knobs for voltage and a knob for current adjustments. Two supply outputs can provide ±supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. The output connections are standard "banana" type 5-way binding posts. Also, rear panel connections provide remote sense and voltage programming/tracking capabilities.

• Dual Outputs: 0 - 20v @ 0 - 1.7 amps
• Dimensions: 8"W X 5.25"H X 10"D

Product Details:
Power Ten precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. This fully regulated and precision power supply is vastly superior to simple plating "rectifiers" because it is accurately controllable yielding very consistent results, and is the ideal power supply for plating applications that require voltages up to 20v and draw as much as 250 amps. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Input: 190 - 253v AC, 60 Hz, 3 phase
• Output: 0 - 20v @ 0 - 250 amps
• Dimensions: 25" x 19" x 5.25"H

Product Details:
Lambda dual output precision, bench / lab, regulated, variable DC power supplies with dual volt / amp metering. Variable fine and coarse control knobs for voltage and a knob for current adjustments. The analog meters provide precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts. Also, rear panel connections provide remote sense and voltage programming / tracking capabilities. Working condition but rough around the edges.

• Dual Output: 0 - 20v @ 0 - 1.7 amps
• Dimensions: 13"D x 8.5" x 5"H

Product Details:
EMI Lambda (Electronic Measurements Inc., division of Lambda Inc.) precision, electro plating / bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The DC supply provides constant voltage and / or constant current. The analog meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities.  

• Input: 190 - 250v AC @ 23 amps, 3 ph, 50/60 Hz
• Output: 0 - 20v @ 0 - 250 amps
• Dimensions: 24"D x 19"W x 5.25"H

Product Details:
Sorensen precision, plating / bench / lab, regulated, variable DC power supply (rectifier) with analog volt / amp metering. Coarse and fine control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The analog meters provide accurate readings of both voltage and current and the rear panel output connections are standard "buss bar" type, additional connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the instruction manual.

• Output: 0 - 20v @ 0 - 50 amps
• Dimensions: 22" x 19" x 3.5"

Product Details:
Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programing.

• Input: 190 - 235v AC @ 26 - 22 amps, 47-63 Hz, 1 ph
• Output: 0 - 20v @ 0 - 150 amps
• Dimensions: 21" x 19" x 3.5"H

Product Details:
Hewlett Packard (Harrison Labs) precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "coarse and fine" control knobs for voltage and current adjustments. The analog meter provide accurate readings of both voltage and current and the output connections are standard "banana" type 5 way binding posts. In addition, rear panel connections provide remote sense and voltage programming/tracking capabilities.

• Output: 0 - 20v @ 0 - 1.5 amps
• Dimensions: 13" x 8" x 3.5"H

Product Details:
Lambda precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5 way binding posts. Also, rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities.

• Input:
• Output: 0 - 20v @ 0 - 1.2 amps
• Dimensions: 12" x 4" x 5"H

Product Details:
Power Ten dual output precision, bench / lab, regulated, variable DC power supplies with digital volt / amp metering. Precision "ten-turn" variable control knobs for voltage and current adjustments. Includes an adjustable "crowbar" over-voltage protection feature. These two supply outputs can provide +/- supply rails or can be used independently and in series for more voltage or in parallel for more current output. The digital meters provide precision readings of both voltage and current. The output connections are high current "buss-bar" output connections. Also, additional rear panel connections provide remote sense and voltage programming/tracking capabilities.

• Input: 190 - 250v AC @ 26 amps, 3 ph, 50/60 Hz
• Dual Output: 0 - 20v @ 0 - 250 amps / 0 - 10v @ 0 - 500 amps
• Dimensions: 26" x 129" x 10.5"H

Product Details:
Kepco Precision bench/lab vairable DC Power Supply 0-15v @ 0-4 amps. Analog voltlamp metering w/variable 10 turn controlknobs for precise voltage & current adjustments. Rear barrier strip allows remote sense & voltage programming/tracking. Alt p/n 131-0530. 18" x 4" x 5"H

Product Details:
Brunelle Instruments Power Supply, 0-20VDC @ 0-3A Output, 120VAC 50/60Hz Input, 4-3/4" x 11" x 6-1/4".

• Input: 120vAC 50-60 Hz
• Output: 0 - 20vDC @ 0 - 3 amps
• Dimensions: 4-3/4" x 11" x 6-1/4"H

Product Details:
Lockheed Electronics Company power supply charger - 500 watt.Input: IEC 115v ACOutput: 3 pin XLR 12-18v @ 4 amps regulatedDimensions: 8-5/8"L x 6-7/8" x 4"

Product Details:
Voltcraft fixed voltage DC power supply. 5-way binding post output.Input: 230v ACOutput: 13.8v DC @ 20 ampsDimensions: 11" x 8" x 5"H

Product Details:
Kikusui triple output variable regulated DC lab power supply. Provides a single, 0 - 6v @ 0 - 3 amps output with constant voltage and / or constant current modes. The other dual outputs provide, 0 - 20v @ 0- 1 amp. These two supply outputs track each other providing ±supply rails and can be used independently and in series for greater voltage output. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Includes copy of the operation manual.Single Output: 0 - 6v @ 0 - 3 ampsDual Output: 0 - 20v @ 0 - 1 ampDimensions: 14" x 8.5" x 6"H

Product Details:
Lambda precision, plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Variable course and fine control knobs for voltage and current adjustments. The digital meter provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Also, rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities.Output: 0 - 20v @ 0 - 1.2 ampsDimensions: 11.5" x 4.5" x 5.5"H

Product Details:
Sorenson triple output precision, bench / lab, regulated, variable DC power supplies with digital volt / amp metering. Precision variable control knobs for voltage and current adjustments. The isolated three outputs constant voltage and/or constant current operation. These three supply outputs can provide +/- supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. The digital meters with analog bar-graphs provide precision readings of both voltage and current. The output connections are standard "5-way" binding posts.. Also, additional connections provide remote sense.1st Output: 0 - 7v @ 0 - 6 ampsDual Output: 0 - 20v @ 0 - 3 ampsDimensions: 12" x 13" x 5.5"H

Product Details:
Lambda regulated, variable DC power supply (rectifier) with digital volt / amp metering. Direct entry keyboard for voltage and current adjustments. The DC supply provides 0 - 18 volts @ 0 - 9 amps, constant voltage and / or constant current. The digital meters provides accurate readings of both voltage and current and the rear panel output connections are standard "barrier strip" type. Additional connections are provided with remote sense and voltage programming / tracking capabilities.Output: 0 - 18 volts @ 0 - 9 ampsDimensions: 13" x 4" x 5"H

Product Details:
Sorensen regulated variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Provides 0 - 20 volts @ 0 - 25 amps constant voltage and / or constant current. Includes a fully adjustable over-voltage "crowbar" protection feature. Can also function as the ultimate battery charger providing complete control of charging current and end of charge voltage. Includes instruction manual. Excellent condition.Output: 0 20v @ 0 - 25 ampsDimensions: 19" rack width x 19" deep x 3.5"HOriginal cost: $2,250. Our price...