40 kv to 250 kv Power Supplies

Product Details:
Hipotronics hi-pot tester. Output is controlled by a large front-panel variac. Voltage metering is in 3 ranges: 0-10kV, 0-25 kV, and 0-50 kV. Current metering is also in 3 ranges: 0-40 mA, 0-80 mA, and 0-160 mA. Three phase front panel breaker for all power as well as a single phase breaker for just the control unit. High voltage on/off push-button switches as well as a reset pushbutton. Sensitivity control for leakage trip point from microamps on up. Both control unit and high voltage tank are mounted on castors for easy movement. Power cord for 3 phase power is 6 feet. Control, power and ground cable between control unit and high voltage tank are 12 feet. High voltage output cable is about 30 feet long with clips. It is RG-8 coax and is permanently attached. Unit manufactured in 1973. Fully tested and reconditioned.

• Output: 0 to 40kvdc @ up to 100 ma
• Control Unit Dimensions: 41-1/2"H x 21"W x 25-1/2"D
• High Voltage Tank Dimensions: 32"H x 31"W x 32"D
• Weight: over 2,000 lbs

Product Details:
Glassman High Voltage positive output power supply. Analog meters on the front panel display output voltage and current. Voltage and current output are adjustable by 10 turn controls on the front panel. Optional control of output and metering from a rear panel terminal strip. Includes slow start that ramps up high voltage output over 30 seconds after HV on is enabled. Front panel "High Voltage On" pushbutton is disabled and high voltage output is enabled by applying the reference voltage to a BNC jack on the rear panel. Includes manual, power cord and high voltage cable.

• Input: 102v - 132v RMS, single phase 48 - 63 Hz
• Output: 0 to 40 kv @ 0 to 15 ma
• Dimensions: 19"W x 3-1/2"H x 16-1/4"D

Product Details:
Glassman PS/LH040P100GHI power supply. 4 kw, 40 kv, 100ma positive output. AC input on terminal strip on rear panel. Front panel voltage & current adjust. Voltage & current meters. Arc quench senses load arc and shuts down HV output for 20 milli-seconds. Arc count shuts off supply for 5 seconds after 5 arcs @ one per second, then restarts. All functions can be remoted. Includes manual. No cables.

• Input: 208v, 3 phase
• Output: 0 - 40 kv @ 0 - 100 ma
• Dimensions: 10-1/2"H x 19"W x 24"D
• Weight: 60 lbs

Product Details:
Hi-Tek power supply. Brand new! The 20 kw OL20K/803/20 power supply is a high performance switched mode unit designed and manufactured by HiTek Power. It is a fully regulated closed-loop system capable of generating 80kv @ 200ma continuously, with a 270ma surge available for up to 1 second at reduced output voltages. Control is maintained down to a few hundred watts. Remote control of voltage and current programming, voltage & current monitoring, HV on lamp and interlocks.

The power supply comprises two units, a rack mounting or free-standing power converter through which remote controls are facilitated and a separate HV unit employing a modular disc construction. Three cable assemblies, one for AC power drive to the HV unit, one for feedback and monitoring and an earth bonding cable connect these two units. These cable assemblies are supplied with the equipment. Brand new!! Includes inter-connect cables.

• Input: 208v, 50/60 Hz, 3 phase
• Output: 0 to 80kv @ 200 ma
• Driver Dimensions: 24" x 10-1/2" x 19" rack, (64 kg)
• Stack Dimensions: 34" x 20" x 23"H, (86.5 kg)
• Axcelis P/N: 210000121

Product Details:
Hi-Tek power supply. Brand new!! The 20 kw OL20K/803/24 power supply is a high performance switched mode unit designed and manufactured by HiTek Power. It is a fully regulated closed-loop system capable of generating 80kv @ 200ma continuously, with a 270ma surge available for up to 1 second at reduced output voltages. Control is maintained down to a few hundred watts. Remote control of voltage and current programming, voltage & current monitoring, HV on lamp and interlocks.

The power supply comprises two units, a rack mounting or free-standing power converter through which remote controls are facilitated and a separate HV unit employing a modular disc construction. Three cable assemblies, one for AC power drive to the HV unit, one for feedback and monitoring and an earth bonding cable connect these two units. These cable assemblies are supplied with the equipment.

• Input: 208v, 50/60 Hz, 3 phase
• Output: 0 to 80kv @ 200 ma
• Driver Dimensions: 24" x 10-1/2" x 19" rack
• Stack Dimensions: 34" x 20" x 23"H
• Axcelis P/N: 100024200

Product Details:

Hi-Tek power supply. 2 units, Series OL8000 HV unit. Variable 0 to 80 kv @ 60 ma. Fast recovery. Driver / stack cable. HV output cable. Brand new!!

This specification is for an 80kV / 60mA OL8000 power supply, consisting of a 19" rack mounted converter unit, and a 19" rack mounted air insulated HV unit. The unit has been optimized for fast recovery after an arc condition, when used in conjunction with customers fast switch circuitry.

2 units:

• Dimensions: 19" x 7" x 26" with rear plug
• Dimensions: 19" x 7" x 21" with rear plug
• Axcelis P/N: 100018050

Product Details:
Spellman HV power supply. Front panel adjustable voltage and current limit. Excellent condition. Works great. Only one available.

• Output: Postivie 0 to 60 kv @ 0 to 5 mA
• Dimensions: 5-1/4" x 18"D x 19" rack width

Product Details:
Glassman positive HV power supply. Current and voltage adjustable from front panel or DB25 serial connector. Like new condition inside. Front panel, right rack ear has slight bend. Works great! Includes HV cable and series correct manual. Only one available.

• Input: 208v, 3 phase
• Output: Positive 0 - 50 kv @ 0 - 100 ma
• Dimensions: 19" rack x 10-1/2"H x 25" deep

Product Details:
Spellman High Voltage negative output power supply. Digital meters on the front panel display output voltage and current. Voltage and current output are adjustable by 10 turn controls on the front panel. Optional control of output and metering from a rear panel terminal strip. Front panel "High Voltage On or Off" pushbutton. 10v from internal or external source can control voltage and current as well as metering from rear terminal strip. Includes manual and power cord. A 10 foot High Voltage cable is $750 additional. This supply has been reconditioned and is guaranteed to operate to factory specifications.Input: 115v RMS, single phase 48 - 63 HzOutput: 0 to -80 kv @ 0 to 1.88 mADImensions: 19"W x 1-3/4"H x 25"D

Product Details:
Lambda positive power supply. Control output voltage w/5k pot using onboard 10V supply. Includes AC cord, HV cable, and manual. Used - Excellent Condition!

Product Details:
Spellman negative 0 - 40 kv, 3 ma, 120 watt. Control output voltage with onboard voltage and a series pot. 5"W c 3 3/4"H x 9"L. 85 - 265 vac input. Includes manual, HV cable, and ac input cable. Used, excellent condition.

Product Details:
Glassman negative high voltage power supply. Voltage and current limiting adjustable from frong panel with 10 turn pots. Analog meters. Very clean. Tested. Guaranteed. Optional HV cable: $195.00.Input: 208v AC, 1 phaseOutput: 0 - 75 kvdc @ 12 mA (Negative)DImensions: 19"W x 5-1/4"H x 22"D

Product Details:
Spellman power supply. Negative polarity. Includes 83 foot long output cable. Brand new in factory crate!!Input: 180 - 264 vac, 3 phase, 50-60 HzOutput: 0 to -80 kv @ 75 ma / 6 kwDimensions: 10.5"H x 19"W x 21"D

Product Details:
Glassman High Voltage 0-15 kv @ 0-3 ma. Optional HV cable.Input: 115v AC analog metersOutput: 0-15 kv @ 0-3 maDimensions: 3 1/2"H x 19" rack x 17" deep.  OPTIONAL HV CABLE $175