Latches

Product Details:
Anchor Lion nickel chrome clasp. Presses into cardboard or light wood. Set includes backer, hasp and clasp. 1.37" x 0.96". 10 dozen pieces per box. 132 boxes available.

Product Details:
Southco panel latch wire cam. 1.944" c-c flange mount holes. (1). Drill 0.6" hole indoor. (2). Mount latch from back side. (3). Snap knob into place. Harris P/N: 448-0664-00.

Product Details:

Nielsen draw latch. 9/16" c-c mount holes. 1-1/8" overall width. 2-3/8" overall length.

• Stainless steel
• Padlockable
• Built-in spring tension

Product Details:
IBM cabinet lock cylinder with arm, mounting clip. Includes two keys. 1" or 1-1/4" CL latch. 0.589" diameter bezel. Requires 0.46" diameter hole, 3/4" behind panel depth.

Product Details:
Cabinet latch. Solid bronze. Keeper plate requires pilot hole in front panel. Arm: 1.5" EC. Knob: 1.5" wide.

Product Details:
Steel latch / catch. 1-3/8" x 2-1/4" x 5/16" lip. 1" c-c mounting holes.

Product Details:
Fits the following C-L load rated hooks: S4055A, S4055B, S4055C, instructions included.

Product Details:
A heavy duty plated steel cabinet latch made for locking rack doors or ?? 3" x 3-5/8" opening required for mounting. 33-1/4" maximum extended arm length. 3 keys included. Made for US Military.

Product Details:
9/16" diameter x 15/16" projection. Mounting 1-3/4" long x 7/8" wide. Holds doors and covers shut without precise alignment. Right hand locking, slotted for screwdriver operation.

Product Details:
Cylinder size 9/16". Overall length 1-5/8". Flated shaft for knob or handle. Turn 1/4 turn to lock or unlock, turn further if you wish to increase locking tension. 1/2" mounting hole.

Product Details:
Lever latch. 1-3/4" overall closed, 2" overall open. 180º lever swivel, 90º pivot on bracket. 1/4" travel. 15/16" x 15/16" mounting plat. 2-7/8" long lever.

Product Details:
Concealed draw latch. 5/16" hex drive. 5/8" diameter jaw rotates 90º to nest concealed. Continued pressure when engaging causes a cam action to cinch tight, reverse pressure releases. 2-3/4" c-c mounting holes. Measures 3-3/4"L x 1-3/4"H x 11/16"W.

Product Details:
1-7/8" wide, 2-1/8" overall length open.

Product Details:
Positive locking draw latch. Recessed flush mount. Nickel plated steel. 1"W x 1-3/8"L x 5/8" deep. Flanges 2-1/4" x 1". 1-13/16" c-c mounting holes. 1-7/8" closed, 2-1/16" open.

Product Details:
5/8" wide, 5/8" deep. Metal catch for spring loaded latches. Screw mount.

Product Details:
Ideal Security Chain-Dor-Loc. Key operated safety chain. Includes 2 keys. 10 per carton. Blister pak for peg hook. Union made in the USA.

Product Details:
1-3/16" wide flange, 3/4" deep x 5/16" high. Screw mount holes 7/8" centers. Mount this catch on parallel surface like the lid.

Product Details:
1-9/16" wide, 1-1/4" height. 1/2" rod or bar diameter. Spring loaded, locks into place.

Product Details:
1-3/16" x 3", shaft length 1". Slide the barrel into the groove and snap the bolt action lock down for immovable security. Solid brass.

Product Details:
Southco captive screw. DZUS lion quarter turn. 0.745"L stud. 0.562"D slotted head.

Product Details:
Illinois Lock Co. cabinet lock. Key removable when locked. 2 keys. Nut not included. 0.75" hole required.

Product Details:
A.L. Hansen Manufacturing locking handle. Includes mounting gasket (plastic). 2-1/4" threaded shaft, 2-1/2" total depth behind mounting plate. 2-3/16" diameter mounting holes. Handle length: 4-3/4". Weighs 13 oz. Includes two keys. New in package.

Product Details:
National file cabinet lock. 1-3/4" long. 4 pin tumbler. Includes 2 keys. Available in Key #107 only. Key removable in locked position only. Never cheaper. Replace all locks so cabinets are keyed the same.

Product Details:
Edwards Co. / General Signal mortise type door opener. Solid brass faceplate and nosing, NOT brass colored paint like newer model. New vintage stock. Made in the USA. Screw terminals. 12 - 16v AC or 4.5 - 6v DC.

Product Details:
Ideal Security Hardware Co. sliding patio door lock with key. Installation hardware included.

Product Details:
Illinois keyed latch. Mechanical. Fits 7/8" hole. Key removable in 1 position only. Includes 2 keys.

Product Details:
National Lock 5 disc tumbler cam lock. 90º turn - key removable in locked and unlocked position. For metal or wood applications. All keys: C415A. 5/8" cylinder length. Fits 3/4" hole. Comes with straight and formed cam.

Product Details:
High Class Lock Co. cam latch. Fits 3/4"D hole. Key removable in closed position only. Cam is 1" center to end.

Product Details:
Schroff cabinet latch. Yellow. Spring return. Mfg. P/N: 122-002-103. Alt P/Ns: 60839-018, 605-00805-0001.

Product Details:
Security Technology electromagnetic lock system. 62 Series. 12v DC, 250 mA. 1200 lbs holding force. New in the box! Only one available.

Product Details:
Keyed industrial latch. 2 point cam lever. Galvanized steel. Folding "D" ring handle. Flush mount. Key can be removed in locked and unlocked postion. Weld flange or drill and bolt to secure. 4-7/8" outside diameter. 3-3/4"D inset, 4"D hole required. Cam is 4" end to center.