High Voltage Rectifiers

Product Details:
Semikron diode. 2.5 amp, 1600v, 180 amp max surge. Alt. P/N: PM1A132037C4.

Product Details:
Semptek high voltage diode, 15kv, 10ma, 1/8" x 1/4"Collins P/N: 353-0233-050.

Product Details:
3 phase IR stack. 3-3/4" x 10-3/4" x 2" high.
Gates P/N: 384-0206-00.

Product Details:
3 phase IR stack. 10 kv, 40 amp. 32 - 40HF100 diodes (each diode = 1000v @ 40 amps). 15-1/2"L x 4" x 2"H. Mfg: P/N: 384-0363-00.

Product Details:
International Rectifier 3 phase rectifier stack. 3-3/4" x 12-1/2" x 2"H. Made for Gates transmitter. Gates P/N: 384-0324-000.

Product Details:
International Rectifier 3 phase rectifier stack. AC input. 4 rows of 26 diodes. 19 kv, 2 amp. 2" x 4" x 19" frame.

Product Details:
Solid state rectifier. Replaces large mercury vapor rectifier "673".

Product Details:
Top hat diode. Axial. 500 ma, 400 p/v. SRC.

Product Details:
Motorola giant rectifier. Broadcast quality. 5 kv, 250 amp surge, 2.5 amp Io. DC7242. 1-3/4" x 2" x 6-1/4"L. Includes fiberglass mounting blocks. Harris P/N: 384-0254-00.

Product Details:
High voltage diode, a solid state replacement for a high voltage tube. 7 pin miniature tube base. 2-3/8" high x 5/8" diameter. Plate cap. Rated at 25 kvdc, 10ma, 250 ns switch time. Suitable diode for CRT supply or other projects. Mil-quality, ED-9821, EDI-7538. NSN: 5961-00-435-2224.

Product Details:
EDI 3 phase rectifier board. EDI 6951 diodes + two 100 ohm, 55 watt resistors. Unknown voltage or current. Diodes measure 3/4" x 3/4" x 6-1/2". These boards are removed from service but new, unused!!

Product Details:
Rectron diode. 1 amp, 1 kv. 82,000 pcs available. NOTE: Minimum order is $1.00.

Product Details:
6 amp, 1 kv diode.

Product Details:
Gates / Harris IR double diode. 20kv, 2 amp. New, old stock. 1" x 16-3/8" long. Harris P/N: 384-0575-000.

Product Details:
International rectifier diode stack for commercial transmitters. 3 phase, 30 kv @ 2 amps. 2 rows of 41 diodes in series on 2" x 4" x 28" frame. Can be split to make bridge.

Product Details:
International rectifier diode stack for commercial transmitters very similar to above. 3 phase. 2" x 4" x 28" frame.

Product Details:

That's right, two components. Completely isolated: an SCR and a HV Diode, BOTH rated at 1kv, 16 amps..... in one package!!

Made by Silicon Power Cube. Package handles 400 amp surge, 2500v insulation. Cost effective if only using diode or SCR, and if you can use both, WOW, what a saving. 5 spade lugs. Heatsink base. Hook up diagram available.

1,000 pieces available.

Product Details:
Plug in solid state replacement for vacuum tubes 5R4 & 5U4. Octal base. Rated @ 2800 vdc, 1 amp. 1-3/8" diameter x 1-1/8" high. Solid State direct replacement modules are much more efficient than their vacuum tube predecessors. In some case, dropping resistors should be used if the higher output voltages often yielded with these diodes will create an unsafe condition. No heater current is required, saving watts there too.

Product Details:
EDI high voltage diode. 20kv, 3 amps. 1" x 2" x 10"L. Used, removed.

Product Details:
EDI high voltage diode. 10kv, 1 amps. 1" x 2" x 4"L.

Product Details:
AM broadcast filter attenuates by greater than or equal to any signalfrom 108 - 174 MHz. "F" connectors.

Product Details:

Plastic capacitor. 19.5kv @ 120v AC.

• Input: 118vAC 50-500Hz
• Output: 20 kvdc @ 5ma
• Dimensions: 3-3/4" x 4-1/2" x 8"H + 2-1/4" for terminals

Product Details:
Double diode assembly. Each diode rated 15 kv, 0.5 E^bI² Sec. 120,000 amps @ 10 µS. 10,000 amps @ 10,000 µS. Use for crowbars. Pair assembled in pairs in fiberglass housing. Overall dimensions: 6" x 5-1/4" x 12-3/4"H. Used. Excellent condition.

Product Details:
General Electric silicon power rectifier diode. 1300v, 1000 amps. The A430 series is General Electric's highly reliable, all-diffused Pres-Pak 1000 ampere silicon rectifier diode.Features:Soft Reverse RecoveryHigh Reverse Blocking Voltage CapabilityPressure ContactsPackage ReversibilityRugged, Glased Ceramic Hermetic Package with 1" Creepage Path

Product Details:
General Electric silicon power rectifier diode. 2400v, 1000 amps, max temp: 200ºC. The A540 series of high power rectifier diodes feature the newly developed, multi-diffusion technology in a new General Electric pressure-mounted package.Features:High Current, High VoltagePressure ContactsGlazed Ceramic Package with 1" Creepage PathReversibility (elminates need for special reverse polarity units)Hermetic SealAvailable in Factory Assembled Heat Exchangers or Ready-to-Mount

Product Details:
3 phase, high voltage rectifier board. Includes 6 ERTI rectifiers, 2 legs of 240k, 2 watt carbon composition resistors for series of 1.875G ohm each. This board is compatible with, and was removed from NEW, 10 GHz Magnetron transmitter power supply with (TP) 845309-2 High Voltage Transformer. Measures 7-1/2" square.