Roller - Lever Arm Switches

Product Details:
Roller arm microswitch. SPDT. 15 amp @ 125/250/460v AC. 1/4" max travel on activated arm. Gray arm. 2-1/2" overall length. 1-3/8"H nominal. 1-3/16" c-c mounting holes.

Product Details:
Roller arm microswitch. SPDT. 15 amp @ 125/250/460v AC. 1/8" max travel on activated arm. Green arm. 2-1/2" overall length. 1-1/4"H nominal. 1-3/16" c-c mounting holes.

Product Details:
Denison Loxswitch roller arm switch. 600v, 20 amp contacts. Momentary: 1 - SPDT, 1 - SPST normally open. Waterproof / explosion proof. 3/4" conduit port. 2-1/4" x 5" x 1-3/4" high. Roller 1-7/8" radius. NSN: 5930-00-767-5590.

Product Details:
Extended roller arm microswitch. 15 amp, 125 / 250 / 480 vac. Roller arm total length is 4.5". Angle mounting plates measure 1" c-c. NSN: 5930-00-058-0193.

Product Details:
Control Switch Division linear roller microswitch. DPST, normally open contacts. Heavy duty 0.5"D roller on end of linear arm is depressed to make switch. 0.06" travel to make switch. 0.25" max linear travel. Six electrical contacts via 3 lug male circular connector with 5 internal keyways. Sealed casing. Fits 5/8" hole. Bushing could accomodate 1/2" to 5/8" panel. NSN: 5930-455-4367.

Product Details:
Roller arm contact assembly. SPDT. Leaf contact with roller and "L" bracket. 1-1/16" c-c mounting holes. NSN: 5999-00-144-2018.

Product Details:
ITW Switches roller arm microswitch. 2 circuits, normally closed & normally open. 16 oz. max actuating force. 5 oz. minimum release force. Spring loaded lever with copper roller. 0.846" x 0.188". 30 vdc @ 7 amp, 250 vac @ 10 amp. 0.896" x 0.897" x 0.327" thick. 1/2" c-c mounting holes, 0.113". NSN: 5930-00-931-6028.

Product Details:
Cherry E63 microswitch with 24" leads on normally open contact with 2 pin molex connector. SPDT, 125v, 100 ma. High quality roller lever. 0.855" x 0.735"H (open position) x 0.255" wide. 0.375" c-c mounting holes.

Product Details:
Cherry E23 microswitch with 1" roller lever. SPST, 5 amp, normally open. Reduces friction on moving trigger components. 1" c-c mounting holes.

Product Details:
McGill Manufacturing Co. snap action switch with roller arm. SPDT, 20 amp, 125 - 250 vac. 1 hp, 125 vac, 2 hp, 250 vac, 50/60 Hz. Lever = 1-1/2"L, roller = 3/8" diameter. 5/8" x 5/8" x 1-13/16". 9 oz. operating force.

Product Details:
Arrow-Hart roller - toggle switch. Mounts in 2 x 4 electrical "handybox". 2 pole ON-OFF, 30 amp switch. 230 vac, 460 vac, 2 HP. 1-3/4" deep below plate. Roller extends 5/8" above plate. NSN: 5930-00-076-7074.

Product Details:
Nylon roller tracks movement and bi-metal spring "snaps" SPDT, 15 amp contact to closed position. Great interlock switch for high current application.

Product Details:
General Electric submersible roller arm switch. Steel, sealed housing with 1" threaded electrical inlet. Switch contact DPST, normally open. Engages when lever rocks in either direction. 440 vac / 250 vdc / 5 amp contacts. Roller arm swings radius of 5". 2" diameter wheel. 4-1/2" x 7-1/2" x 7" high max. Very well made by G.E. Extra heavy duty.Made for outdoor, military or underwater use. Weighs 15 lbs. NSN: 5930-00-296-6408. Government cost is $850.00.

Product Details:
Cutler Hammer hermetically sealed, water tight, enclosed switch. Arm travels 45º CCW to switch + 15º to end. Industrial grade. 1.5 amp contacts. 1- N.O. & 1- N.C. set. All metal parts are bronze or stainless. Box is PVC. Lid has rubber seal. 3" x 3-1/8" x 8" long. Arm 3" long center to roller top.

Product Details:
Microswitch, roller lever (no brand). Contacts: SPDT. 0.545" long x .20" thick x .462" high body. 0.725" long to end of roller arm. 0.762" overall height with roller. 0.185" c-c mount holes. 7 amps, 250v AC.

Product Details:
Cherry microswitch, roller lever. Contacts: SPDT. 0.5" long x .229" thick x .749" overall height with roller. 3 amps, 125v AC. 2 amps, 30v DC. Alt P/N: 132A.

Product Details:
Microswitch Corp. ® roller lever microswitch. Type Z. Industrial cast lever arm. Contacts: SPDT, 5 amps 250v AC. 2.45" length overall including roller arm. 1.795" height overall from bottom of bracket to top of roller arm. Switch makes at 1.778". 1.19" c-c mount holes in bracket.

Product Details:
Unimax roller arm microswitch. Contacts: SPDT, 20 amps 125 / 250 / 480v AC, 0.25 amps 250v DC, 0.5 amps 125v DC. 0.68" thick x 1.94" long x 1.04" high body. 1.412" overall height with roller. Contacts make at 1.375". Solder terminals. 1" c-c mount holes.

Product Details:
Microswitch Corp. ® roller switch, water proof. 10 amps 125v AC, 5 amps 250v AC, 3 amps 460v AC. 1" thick x 3.38" long x 1.84" high body. 2.96" overall height with roller. 2-1/8" x 2-5/8" oval mount base. Switch makes at 2.955". 1/2" male electrical thread.

Product Details:
Microswitch Corp. ® roller switch, water tight. 10 amps 125v AC, 5 amps 250v AC, 3 amps 480v AC. 1" thick x 3" long x 2.856" high including roller. 2-1/8" x 2-5/8" oval mount foot. Contact makes at 2.73". 1/2" EMT electrical mount. New in box.

Product Details:
Microswitch Corp. ® roller switch. Zinc chromate primed, water proof. 10 amp contacts. 1" thick x 2-5/8" long x 1.81" high body. 2.978" overall height with roller. Switch makes at 2.961". 1/2" male electrical thread. 1" c-c mounting holes.

Product Details:
Unimax roller switch, water tight. 10 amps 125 / 250 / 480v AC, 0.25 amps 250v DC, 0.5 amps 125v DC. 1" thick x 3" long x 2.961" high with roller. Depresses at 2.936". 1/2" box connection. 1" c-c mounting holes.

Product Details:
Microswitch roller arm snapswitch. SPDT. 125v AC @ 10 amp, 1 HP. 250v AC @ 2 HP. 125vDC @ 1/2a / 250vDC @ 1/4a / 480v. 11-1 N operating force. 3 hole mounting. 1/2" conduit fitting. 1" x 4" x 2-1/8"H. 3-5/8" overall height.

Product Details:
Cherry microswitch roller snap switch. SPST, normally open. 5 amp, 1/4 HP, 125 - 250v AC. 1" long lever, rests @ 11/32" above switch body. Depresses to 3/16". 1" mounting center. 0.187" spade terminals.

Product Details:
Bonnella Microswitch® roller switch. SPDT, 5 amp, 120v. Roller folds over towards contacts. Spare part for Jaguar, Triumph Daimler classics. 1" mounting center, 0.187" spade. Made in England.

Product Details:
Microswitch Corp. ® heavy duty roller arm switch. 2 poles, 1 normally closed, 1 normally open. 20 amp contacts. Double roller on 2-1/2"L arm. Weather sealed. 2-1/4"W x 2"H x 3/4" body. 1" mount center. 8 foot permanent 12 gauge high-temperature leads. Made in 1965. NSN: 5930-00-050-9398.

Product Details:
Kerrigan Lewis Cloth Covered Wire, Single celanese yarn heavy poly served magnet wire. 38 AWG, Red, Single solid conductor. Factory put-up spools weigh between 0.5 - 1.5 pounds.

Product Details:
Microswitch roller lever switch. Military surplus. Very stiff rotary action. 4 switches: 2 normally open, 2 normally closed. 5-1/4" overall length. 3/4" MIP threaded base. 1-7/8" radius to outside roller. 8 leads are 20 feet long, high temperature wire.

Product Details:
R.B. Denison / Telemecanique lox switch. 220v DC @ 500 mA. 1PST, N.O., momentary action. 30 inch-ounces switch actuating force. Water tight. 0.50" actuator roller diameter. NOS. Mil-spec. Made in the USA. DC: 1985-1992.

Product Details:
ITW snap-action switch actuator. Roller lever, bracket and hardware. For ITW and similar microswitches. Actuator arm measures 1.25"L. 0.37" O.D. wheel in 0.46"H bracket. 1.14"L x 0.38"H x 0.34"W mounting bracket.

Product Details:
Roller lever actuator for snap-action switches. Movement differential: 0.030", ±0.015". Operating point: 0.671", ±0.031". Pre-travel: 0.093" max. Over-travel: 0.062" min. Mounting centers = 0.507" x 0.300". Originally made for ITW's Series 11 mini-switches.

Product Details:
Roller arm bracket. 1-1/8" x 3/4" mounting plate. 0.424" deep. 0.265" wide roller, 0.164" diameter. 0.310" x 0.525" mounting hole grid. NSN: 5930-518-3189.